Notes on the use of electric kettle

This article is from https://www.zs-lingfeng.com

Usually use the electric kettle, the first thing to pay attention to is safety. What are the precautions for using an electric kettle?

This article is from https://www.zs-lingfeng.com

1, before the use of the kettle, to carefully consult the kettle instruction manual, check the kettle specifications as shown in the voltage and power, but also check the power cord and plug and use the area of the power cord and plug is consistent. If the voltage shown is not legally used, please stop using immediately, otherwise the kettle may explode after plugging in the power supply. Secondly, if the power is too large, more than the use of the area circuit can withstand the current, may cause circuit short circuit and damage. Again, if the plug does not meet the requirements of the use, it can not be inserted into the circuit for use, otherwise it may cause circuit damage.

2, the water injected into the kettle, should not exceed the highest water level line, should not be too little, at most can not exceed the highest water level, the lowest can not be lower than the lowest water level scale. Water overflow or empty burning is easy to cause kettle failure and safety risks. Too much water, the kettle in the boiling, there may be flying water, easy to hurt the next person. Too little water may cause dry burning and damage some parts inside the kettle, thus reducing the service life of the kettle.

3, water into the pot, first connect the power cord with the pot body, and then plug the other end into the power socket, you can heat. For the attached switch or automatic electric kettle, the switch should be unplugged to make the kettle connected to the power supply.

4, The electric kettle is a high-power electrical appliance. Before use, please read the manual carefully and select the appropriate power socket.

5, the power plug should be kept dry and clean, do not shower with water, do not place close to the fire, so as not to leak or burn out.

6, After the electric kettle is energized, do not unplug the plug at will. It should wait for the automatic trip, and then cut off the power for drinking water after the heating is completed, so as to ensure safety.

7, the electric kettle has no water, do not empty burning, it is best to use someone next to take care of, but take care of the person must not be a child, so as not to children touch the bottle burns.

8, During the use of the electric kettle, it is normal for the kettle body to become hot. Do not move the kettle body at will to avoid bad contact between the base and the kettle, which will lead to water heating and failure. Do not touch hot parts such as the kettle body when the water is being reduced, so as to avoid burns.

9, The power cord attached with the electric kettle cannot be used for other purposes. It should be used according to the regulations. When using an electric kettle for the first time, fill it to a high water level, boil it and then pour it out.

This article is from https://www.zs-lingfeng.com

【 Go Back 】 | 【 Print 】